Tyger Auto 3.5″ Rider Running Boards Compatible with 2009-2018 Dodge Ram 1500; 2010-2024 2500 3500; 2019-2024 Classic | Crew Cab | TG-SS2D35318 | Side Step Rail Nerf Bars

$199.00

Added to wishlistRemoved from wishlist 0
Add to compare


Price: $199.00
(as of Apr 05, 2025 19:52:44 UTC – Details)

From the brand

Driven by Adventure

Tyger Auto is a proud car culture innovator powered by a group of adventure seekers with lifelong automotive parts experience.

Tonneau Cover

Tyger Auto offers a full line of tonneau covers- soft roll up, low profile, soft tri-fold, or a tough alloy tri-fold tonneau cover.

Running Boards

TYGER Auto running boards are made of the highest quality materials and are easy to install with simple bolt-on installations.

Outdoor & Sports

Inspired by outdoor adventures, Tyger Auto provides you with diversified outdoor gears such as ski rack, roof rack, bike rack etc.

Fender Flares

Fine the factory style classic truck fender flares or a more eye-catching pocket bolt-riveted style fender flare here in Tyger Auto.

Driven by Adventure

Founded in 2013 in California, Tyger Auto is a proud car culture innovator powered by a group of American and Canadian adventure seekers with lifelong automotive parts experience.

Our mission is to introduce innovative designs that emphasize excitement, reliability and value to car owners.

FITMENT – Compatible with 2009-2018 Dodge Ram 1500; 2010-2023 2500 3500; 2019-2023 Classic | Crew Cab [Cab Size Note: Only fit Crew Cab with 4 full-size doors. Not for Quad Cab or Mega Cab. (See Image for more info)] | Will not fit 5th Gen 2019-UP Ram 1500 New Body Style
OVAL TUBE DESIGN – Distinctive oval tube design of these nerf bars provides a wider 3.5 inch step pad surface than their single round tube counterparts. Bigger step pad’s non-slip surface = Greater Stability.
SEAMLESS CONSTRUCTION – Seamless, end to end, full body E-coating heavy textured powder finish keeps all the dirt and water away while providing superior rust and corrosion protection. At the same time, the textured finish enables these simple and clean side steps to retain their rugged off-road appearance.
WHAT’S INCLUDED FOR EASY INSTALLATION – Includes both driver and passenger side running boards. | Includes all hardware and brackets required to mount onto the rocker panel. | Easy bolt-on installation. | Installation can easily be done in 20 minutes. | For 2009-2011 and some 2012 models, it requires minor drilling of 1/4” holes through the pinch weld for support brackets.
QUALITY GUARANTEED – TYGER offers a no-hassle 5 year warranty for US customers against manufacturing defects.

Customers say

Customers find the running boards easy to install with assistance and appreciate their appearance, build quality, and functionality, particularly noting they work well with 4-door Rams and hold heavy weights. The boards fit well, with one customer mentioning they hug the body tightly, and customers consider them good value for money. However, alignment issues are reported, with multiple customers noting that the brackets don’t align with factory holes.

AI-generated from the text of customer reviews

13 reviews for Tyger Auto 3.5″ Rider Running Boards Compatible with 2009-2018 Dodge Ram 1500; 2010-2024 2500 3500; 2019-2024 Classic | Crew Cab | TG-SS2D35318 | Side Step Rail Nerf Bars

0.0 out of 5
0
0
0
0
0
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. TexasAg37

    These Look Great
    Material is nice. These Fit my Tradesman Classic RAM 1500 Crew Cab beautifully. Fairly easy to install with assistance. They hug the body tightly so if you are looking for a big step, probably not what you are looking for. Value for money spent was good.

    Helpful(0) Unhelpful(0)You have already voted this
  2. John

    Easy to get in and out of the truck now
    Absolutely perfect fit, looks great and not to difficult to install

    Helpful(0) Unhelpful(0)You have already voted this
  3. William

    Looks good, easy install.
    Looks good, easy install. Packaging was excellent and protected product well, instructions were good. Helpful hints from other reviews helped in the install: Clean off paint from studs before threading nuts on studs and put together loosely before tightening everything. They seem really well made, sturdy, and the powder coating looks like it will last. I rarely give 5 stars to anything but the price and quality of these rate it.

    Helpful(0) Unhelpful(0)You have already voted this
  4. Allen Jennings

    Great product with not so great instructions…
    5 star product, 2 star instructions. I did get them installed and they look and function great, it just took some extra time (20 minutes or so) due to product labeling. They label three brackets ‘A’ and three brackets ‘B’. One ‘A’ bracket goes on the driver side, 2 ‘A’ brackets go on the passenger side. One ‘B’ bracket on the passenger side, 2 ‘A’ brackets go on the driver side. Sounds easy enough until you get to the ‘E’ and ‘F’ brackets, 3 of each, that do the same thing! In the end they are installed and as stated look and function great. I would buy again.

    Helpful(0) Unhelpful(0)You have already voted this
  5. Debbie Goss

    Great Value and Look Great!
    These Running Boards look great on our 2016 Ram Rebel! They were very easy for my husband to install.

    Helpful(0) Unhelpful(0)You have already voted this
  6. Bob S.

    Running Boards Installed On 2019 RAM 1500 Classic Quad Cab
    I have a 2019 RAM 1500 Classic (Old body style) and these running boards fit perfect. I found the directions to be very good, you just have to read them and pay attention. My truck already had threaded holes from the factory for both front brackets. They were very rusted, and I could not get the bolts to thread in until I ran a tap through them. Once I did that, I had no problem. All of the main brackets have letters stamped on them. Just line them up with the diagram in the directions and you can’t go wrong. I was looking for running boards that were not tremendous and these fit the bill. Tyger makes quality equipment. Thay match my front push bar and rear hitch mount step perfectly. All of them are heavy duty.

    Helpful(0) Unhelpful(0)You have already voted this
  7. blackebob

    pinch weld is at the bottom of where the door meets the frame, not where part A bolts to part F
    While this thing is very sturdy, it is pretty much useless with the instructions it came with. I just finished putting on the running boards with these bad instructions due to lack of detail. I was ready to throw this thing out in the street. Is it asking to much to give an actual picture on where the bolts are located on the truck? Please do not bother with customer service, as you will likely get a customer service rep who is following the check list she has been told to follow, and has not ever changed the oil. A simple photo of the location would have saved a lot of cussing. I feel bad for those reps, they are trying to make a living and Tyger is setting them up to fail. She kept telling me it would not fit because I said it was not a Ram classic. I was wrong, it is a classic. If she would have been told to ask if the fuel cover port was round or oval, I could have said it is round. That indicates it is a 3500 classic. I did not know that, so she just kept telling me the running boards would not fit my truck. It did. I am so tired of the current level of knowledge in customer service.So for those who do not work in the auto industry, a pinch weld is at the bottom where the inside and outside meet. Parts A and F do not attach together, part F will bolt to the truck.

    Helpful(0) Unhelpful(0)You have already voted this
  8. Joseph Arias

    Nerf bars
    Quick delivery and easy to install..Beautiful look to the truck

    Helpful(0) Unhelpful(0)You have already voted this
  9. Dan Rochon

    Prenez le temps de lire les instructions et comprendre quelles “bracquet” vas ou. Un peu de confusion à savoir quelle “bracquet” à installée et ou.

    Helpful(0) Unhelpful(0)You have already voted this
  10. Terry S.

    Very happy with my new steps. Love the black crinkled finish on my lifted black Ram and it seems extremely durable. Directions were straight forward and easy to follow so installation isn’t hard if you’re handy. Two hours and they were on. They’re super solid and handle my 200lbs no problem. Would highly recommend.

    Helpful(0) Unhelpful(0)You have already voted this
  11. Meo

    Easy to install and great looking

    Helpful(0) Unhelpful(0)You have already voted this
  12. Amazon Customer

    J’ai du couper les 6 braquettes et les rallonger de 1-1/2″ . Car d’origine vraiment trop près du body

    Helpful(0) Unhelpful(0)You have already voted this
  13. J Coulter

    I like the different texture. Step is a little narrower which gives a sleek look and enough size to do what it’s supposed to.

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published. Required fields are marked *

    Tyger Auto 3.5″ Rider Running Boards Compatible with 2009-2018 Dodge Ram 1500; 2010-2024 2500 3500; 2019-2024 Classic | Crew Cab | TG-SS2D35318 | Side Step Rail Nerf Bars
    Tyger Auto 3.5″ Rider Running Boards Compatible with 2009-2018 Dodge Ram 1500; 2010-2024 2500 3500; 2019-2024 Classic | Crew Cab | TG-SS2D35318 | Side Step Rail Nerf Bars

    $199.00

    Reelpulls
    Logo
    Compare items
    • Total (0)
    Compare
    0
    Shopping cart