Bully BBS-1103 Truck Black Powder Coated Side Step Set, 2 Pieces (1 Pair), Includes Mounting Brackets – Fits Various Trucks from Chevy (Chevrolet), Ford, Toyota, GMC, Dodge RAM and Jeep
Original price was: $74.99.$59.99Current price is: $59.99.
Price: $74.99 - $59.99
(as of Apr 16, 2025 19:39:45 UTC – Details)
Bully Black Bull Aluminum Side Step ensures safe and convenient entry and exit into a truck or SUV. It is a practical and budget friendly upgrade for vehicles. For most truck and SUV owners, adding a side step is often their first modification for their truck and/or SUV. The side step is constructed from single-piece aluminum cast which is corrosion resistant, hence prolonging the life span and durability of the side steps. The frame is lightweight yet durable and does not add unnecessary load to the vehicle. It has matte finish that creates a universal appeal and provides a non-slip stepping surface. Textured and extra deep, this step can be attached to a wide range of sports trucks and SUVs by Chevrolet, Dodge RAM, Ford, GMC and Toyota.
Supreme Support – Made From Cast Aluminum For Superior Strength With No Welded Seams And A 350 Lb. Weight Limit To Provide Maximum Strength
Rugged Sophistication – Cast From One-Piece Of Chrome Plated Aluminum, Bully Steps Provide Easy, Safe Access To Your Cab Even In Extreme Conditions. The Extra-Deep Step Is Rated To 350 Lbs.
Universal Fit For Most Vehicles – If You Could Use A Boost Into Your Cab, This Bully Step Adds A Lot Of Elegant Form To The Function And Is Designed To Fit Most Trucks And Suvs
Comes in 1 Pair – You will receive two pieces for your Trucks and SUVs. All Mounting Hardware and DIY Instruction Included
One-piece Design achieves maximum strength at 350lb limit while remaining lightweight. Reliable non-slip step area
Customers say
Customers find the truck steps easy to install with good instructions, and appreciate their sturdy construction with solid mounting. Moreover, they work well in their location, look good, and offer good value for money. Additionally, customers praise the ease of access, making it much easier to get in and out of the vehicle. However, the fit receives mixed feedback, with some reporting perfect fit while others find them too small. Moreover, several customers report issues with paint chipping and peeling.
AI-generated from the text of customer reviews
13 reviews for Bully BBS-1103 Truck Black Powder Coated Side Step Set, 2 Pieces (1 Pair), Includes Mounting Brackets – Fits Various Trucks from Chevy (Chevrolet), Ford, Toyota, GMC, Dodge RAM and Jeep
Add a review
Related Products
Original price was: $74.99.$59.99Current price is: $59.99.
Susan Chafin –
Quick delivery and a great product.
They were very easy to install and are working great, The quality is also very good. There was hardware for 2 or three vehicles and did not need to buy anything.
I never received my product order! But i was charged for it nonetheless. Not happy at all! –
Not a green thumb
Really nice steps
Amazon Customer –
Easy to install and sturdy.
Would be better if slightly angled toward the back but still, they work good and are easy to install.
Walter L. –
Sturdy good qualiity
Good and sturdy step. Make sure you put the steps in the right place ( my application required drilling thru spot weld flange at bottom of rocker panel ) don’t follow instructions for placement. They are just meant for ballpark placement ( ** SAFELY ** Mockup a step ) 2 blocks a board or a bucket or anything that’s sturdy use it to get in and out of truck. It’s all about ergonomics not looks. Find the right spot to Mount your steps ( Trust me on this ) . It needs to be in right spot to be able to physically bend and fit into your truck . Other wise why did you buy them ?? Once you have them on you will be happy you took the extra 10 minutes or so to find the right personal fit .
Chris Crockett –
DO NOT BUY! Even worse than the negative reviews let on.
Absolute garbage. I haven’t even finished installing the 1st one, but I’m so frustrated buy the product quality and horrendous installation instructions.Quality – Not installed and already chipped. Small bubbles or voids in the finish have already chipped off and exposed bare metal.Installation is turning out to be a nightmare. 4 holes drilled thus far and I’ve only just got them to line up side-to-side. Instructions say 8 1/8″ between holes, but they are 8 1/4″ apart. As to how far in from the edge of the panel that you need to drill, its kind of up in the air. IF you are going to purchase these, make a template (yes, NO templates included). Make the template from real measurements, not from the instructions. Get a paint pen to make where the panel edge meets up to the step when its firmly seated. This will give you a reference as to how far back from the edge to drill your holes.As I said, 4 holes and not a single fastener in yet. My panel is looking like swiss cheese. I don’t now know if the panel still has enough integrity to carry a load. Wish I would have known that installation was going to be hit or miss. I would have started on the passenger side, which rarely gets used, to hash out a game plan.I will be sure to steer everyone away from Bully products.
J. B. Kramer –
Badly designed doomed for failure if installed according to instructions.
OK on my Ford 2012 F350 there is a single metal flange attached to the bottom of the truck. Maybe 3/16th thick. Not too sturdy in other words. This step is supposed to bolt into that flange. I did not see that working well, or for long.So I cut a piece of 1/4 in thick aluminum 2 inch L stock a couple inches longer than the top of the step. I then drilled this with 4 holes, 2 over 2, into the step as well and attached that with the L upside down so the horizontal flange ran under the truck frame. I attached step and flange with the provided bolts. Which BTW are too big to fit in the holes in the step. So I had to drill out the holes.I did not have any lock nuts handy but I added lock washers to the attachment. I’ll get some lock nuts soon and replace the standard nuts. Stepping on the step forces the L flange into the bottom of the truck taking the load off the flimsy flange on the truck. Hopefully this will hold up.The steps themselves seem to be sturdy and that’s the only reason they got 3 stars.
G. Shoemaker –
1998 F150 (does not include lock washers)
These things came with a ton of extra stuff for connecting to many types of vehicles. The installation for mine was pretty straight forward I did not need anything other than a couple bolts and screws. The spacing/or distance apart for making the holes was straight forward also. The issue that I had was lining the hole up from the edge of the lip. I found that I had to expand the initial hole a bit on each because of the difficulty of the line up and the tightness of the location for placement. I also had to go buy myself some lock washers because none are included. Overall this was a very easy install and they are very sturdy, I come in at a couple pounds under 200 and these things hold just fine. Worth the money and the small amount of hassle with installation. I needed a drill with the proper bits and a Philips screwdriver or drill bit and a socket set. Additionally I needed a Dremel to expand the holes in the truck to line up properly but if need be you could use a hand file.
Jaleisha –
Awesome product
Very sturdy and it comes with all the hardware you would need regardless of truck type. I have 2009 F150 and had to drill new holes for installation. It was a pain and took about 2.5 hours due to poor drill bits and what felt like iron pockets in the steel. In the end, they are worth it because my daughter and short family members can now comfortably get in and out. As a bonus they look good too. When I decide to replace my torn drivers seat these will definitely help prevent me from tearing up the new one. Worth it! But definitely have good drill bits on hand and measure twice. (I used a dremel with diamond burr to elongate the holes because they were slightly off, worked great). Hole pattern 9/16 from edge and 8 & 3/16 center to center on the holes.
Rmr –
Cumple con las expectativas requeridas para la camioneta e imagen
Ahmed –
Doesnât fit or compatible with Grand Cherokee 2009 as mentioned by seller.
ON. –
Die steps hatte ich in 30 min angebracht.Die Installation ist mehr als einfach.Beim Chevy Blazer K5 Bj.78 überhaupt kein Problem.Ohne irgendwelche Adapter oder Passhülsen zu verwenden.8 Löcher bohren , anschrauben – fertig.Hält bombenfest.
Crox –
Easy to fit. Very sturdy. Look neat.
MarcOH –
Passt