CEESC Large Cat Door for Interior/Exterior Door, Weatherproof, Black, Rotary 4 Way Locking Pet Door for Cats & Dogs with Circumference < 23.62", Upgraded Version
Original price was: $19.98.$18.98Current price is: $18.98.
Price: $19.98 - $18.98
(as of Mar 19, 2025 14:32:25 UTC – Details)
Product Description
Outer size: 9″ / 23CM(W) x 10.6″ / 27CM(H) x 2.17″ / 5.5CM(D)
Inner size: 7.1″ / 18CM(W) x 7.7″ / 19.5CM(H) x 2.17″ / 5.5CM(D)
It’s suitable for cat lighter than 17.63 lb and waist circumference shorter than 23.62″ / 60CM.
Note:
1). Make sure that the width and height(shoulder level) of the pet are inferior to the pet screen door, thanks.
2). The magnet at the bottom of the door frame is for aligning the flap after swings, it doesn’t work as a lock, thanks.
Upgraded Product Features:
1. Convenient knob-style switch, you could easily control your cat or other cats in or out options, in only, out only, in and out freely, totally locked.
2. Fixed groove with snap tabs for weather-proof brush strip greatly help fix it.
3. Tunnel depth could be cut down, plus 1 package long + 1 package short screws, double-sided tape, considerably meet your needs that install to different kinds of interior doors, exterior doors, walls, windows, cupboards, glass, etc.
Installion instructions
1. Draw outline on the paper board
Draw the cat door frame on a paper board and cut it down.
Note:
You had better prepare these necessary tools first, pencil, ruller, electric saw, drill, screwdriver, double-side tape.
2. Draw outline on the door
Use a pencil draw around the edge of the cut paper on the door you want to be fixed to.
Note:
Generally, average installation height is around 10-15 cm from the floor.
3. Drill 4 corners for holes
Drill 4 corners for thorough holes first with an electric drill
4. Cut out a tunnel hole
Cut out the tunnel hole with an electric saw starting at holes drilled.
5. Put the cat door in the door
After the tunnel hole is cut out, it’s better to wrap around it with a layer of wood skin. And if your hole is cutting a little big, it’s quite neccessary.
6. Cut down tunnel depth if necessary
If the cat door is too thick for your door, use a scissors or cutting machine to cut down some part of tunnel along the line A or B. The cutting scale is about 2-4CM.
7. Mount to the door
Mount the cat door with double-side tape to the door. 8 screws have been provided for your use, tighten them with a screwdriver on both sides.
Note:
8 screws for 4 holes on both sides, screw them all in 2 sides as illustration shown above, please. These 8 screws are designed to work together, they are not short.
8. Done
Place screw caps over the screw holes, press them on. The installation is completely done.
☞CONVENIENT LOCK — The knob-style switch is 4 way rotary, you can easily rotate it to 4 modes with the arrow and icons to control your cat’s access options: in only, out only, in and out freely, totally locked.
☞IMPROVED WEATHER-PROOF BRUSH STRIP — It provides a fixed groove with snap tabs for weather-proof brush strip, firmly fix the brush strip. Even if the brush strip comes off, easy to put it back into the fixed groove. This greatly help the brush strip reduce noise, stop rain drop, wind or pest like mosquito to the most.
☞THOUGHTFUL SCREWS — It comes with 2 packs of 8 screws each, one is packed with short screws, the other long. Please screw in with them from both sides to prevent crack out of incaution, don’t just from one side. You could make 8 screws for the 4 screw holes with long + long, long + short, or short + short group according to the depth of door / wall being installed.
☞EASY TO INSTALL — Step by step installation instruction in the instruction manual included in sales box and installation presentation video for you reference, take care of notice and prepare necessary tools, easy to install as your need. The tunnel depth could be cut down according to your installation need.
☞APPLICABLE FOR — Inner size 2.17″ / 5.5CM(D) x 7.1″ / 18CM(W) x 7.7″ / 19.5CM(H), it’s suitable for cat with waist circumference shorter than 23.62″ / 60CM. And the outer size is 2.17″ / 5.5CM(D) x 9″ / 23CM(W) x 10.6″ / 27CM(H). It fits to being installed to interior doors, exterior doors, walls, windows, cupboards, glass, etc.
Customers say
Customers find the pet door easy to install and working well. They appreciate the design and value for money. However, some customers have differing opinions on the build quality, lock feature, size, and whether it’s cat-friendly.
AI-generated from the text of customer reviews
9 reviews for CEESC Large Cat Door for Interior/Exterior Door, Weatherproof, Black, Rotary 4 Way Locking Pet Door for Cats & Dogs with Circumference < 23.62", Upgraded Version
Add a review
Related Products
Original price was: $19.98.$18.98Current price is: $18.98.
Bpinon –
Game changer!
We absolutely love this cat door. We placed it on our garage door for our cats to come and go to get out of the weather. Love that you can change the lock settings, to allow in but not back out, out but not in etc! For the price this is a no brainer! Install was super easy after watching the how to video. Got it in without complications. Cats caught on pretty quickly as well and love the independence factor. No more waiting for lazy mom to open the door!Only downside is that it is in fact super easy to figure out. We get the occasional stray cat locked in so you do have to be mindful of that if you get rodents or strays that get curious.
music on vinyl –
4 1/2″ grinder with 1/16″ thick cut-off wheel is the best way to install in steel entrance door.
Nice door for the price. I used the included screws to mount each side to the respective side of the door. They are plenty tough to hold the plastic frame in place. This is my 2nd pet door install. The first was mounted on an interior wood door, and I used a jigsaw to cut the hole. I considered a jigsaw for this install, but after doing some reading, I decided to try my angle grinder with a 1/16″ thick cut off wheel. I used the outside facing frame of the pet door as a template (the part of the frame intended to fit through the door). I traced it with pencil, and went back over with a sharpie. I cut on the outside edge to leave some wiggle room. The outside frame will cover quite a bit of over cut area. The trick was the thin cut off wheel. Once through the steel, it cut very easily through the steel, and it was easy to hold a straight line without any guide. I did pre-drill the four corners of my tracing, just as a guide. You cut one side of the door at a time. Use the drilled holes as your guide for tracing the other side of the door after cutting the first side. It’s easy to remove more material with the grinding wheel if you need to take a little more off for the frame to slide through. I’m going to link the 1/16″ cut-off wheels I purchased through Amazon. The cut-off wheel performed great. Definitely pop the pins out of the hinges and put your door on sawhorses. I used a face shield instead of safety goggles (face shield doesn’t fog up). You can wear glasses under a face shield too. The cutting of the hole is the trickiest part for sure. I used a punch to start the holes for the 8 screws that hold the frame on (4 on each side). Pre-drilled the holes with a small bit. Hand tightened the screws (so not to crack the frame). https://www.amazon.com/dp/B0CQR19NRK?ref=ppx_yo2ov_dt_b_product_details&th=1
batyah –
A decent cat door with a few modifications.
This was the only cat flap-door that was close to the size hole already cut in my cats’ feeding-house so decided to take a chance because the vinyl freezer-strip I had ordered and put in during a warm spell between freezing weather had not preformed as advertised by seller. Thankfully they came during a nice Spring-like time and got them installed. I had to enlarge both openings slightly but not unexpected. the front sections were fairly easy to install, but I did have to remove half of the weather-brush strip on each door so they would swing a bit easier and not be too difficult for the cats to figure out how to use them Because the inside of the converted Rubber Maid storage container is not smooth I did not try to use the inner frame portion due to it being bigger opening diameter (designed to fit over the outer doors opening “lip”. By the end of the day all of the cats had used the new doors although with a little trial-n-error. We are now getting a snow storm with drifting snow so I checked the doors after shoveling the deep snow away although neither door was covered by the drift. One cat; the most timid one, did not get through the door but rather waited for me to give her food, but so far the other cats have had no trouble using the doors. After installing the doors I removed the clear cling covering from the flap and tossed it away with the other refuse only to re-read the accompanying included and reading their cautions!! ATTENTION: please do not throw that clear cling covering away because they say to put it back on if the temperatures get below freezing to prevent the clear plastic door flap from breaking!! Guess I’ll find out if that plastic flap will hold up 🙁 without the cling cover. The back cover section has two lines marking the depths one can cut down so it fits thinner doors but because the plastic is hard you would need to use either a skill saw or hacksaw but not sure how you would hold onto the frame piece while cutting because I think it’s too brittle to use a vice to clamp it. Having another person hold it would be a big help. The bottom of the door flap has a weight in it to keep it hanging straight down as well as closed when a cat is not using it so a regular wind will not blow it open – make sure when you install the front door frame that you keep it LEVEL or the flap will not work!!!!
Steve –
Snaps shut every time.
Worked wonderfully.
Pasquale –
Applicata va benissimo. Leggero spiffero ma ci sta.
*Carabosse* –
Acheter pour nos 3 chats afin qu’ils puissent aller dans le garage ont sont mises meurs litietesen 2 jours ils l ont adoptées !Facile à installer et très pratique
Letty –
Fue fácil para instalar, siempre y cuando tengas una sierra caladoraâ¦Nosotros lo usamos para un perrito chihuahueño pequeño. Al principio le daba miedo, pero muy pronto se adaptó a usarlo.
Ro –
Perfect for our small cat, we installed a 1â thick styrofoam insulation into the open window, then cut the hole to size and installed cat door into that. Easiest install, we did have to epoxy the door frame to the insulation because of how we decided to do it so itâs perm, but for the price keeps the house warm and with some treats/encouragement kitty loves the freedom. Door works great with a wee magnet to keep it closed. Had to prop and show how but she got it. Going to paint it out to make it pretty.
Betty Murk –
Mijn deur is een beetje te dik voor dit luik. Daarom ontstaat er een open ruimte en ben ik genoodzaakt om het luik andersom in de deur te maken. Ook is de borstelstrip niet dik genoeg en zie je rondom het deurtje een kier waar kou doorheen kan. Gebruik ook andere schroeven dan die erbij zitten want die zijn van ontzettend slechte kwaliteit. Dit luik is echt zijn hogere prijs niet waard.